Latex Seals for Dry Suits Catalogue - Precision Dippings Marketing Ltd

Latex Seals for Dry Suits Catalogue

Back to Marine

Tolerances on all items +/- 2.5%.

* = most popular products, quickest lead times

Print page

NECK SEAL

Standard design. Four sizes, with sizing rings at Neck allow seal to be cut for personal comfort.

	Dia. 'A'	Pt. no.
Extra Large	97	5803
Large	92	5804*
Medium	87	3508*
Small	78	3789*

WRIST SEAL

One size seal with sizing rings at wrist aperture to be cut for larger sizes.

Large- 'A' dia 40mm Part No. 1132*

DIVERS GLOVES

Standard design gloves with built in wrist seal reversed to give water tight fit. Palms roughened for better handling. Available with or without cotton liners. Can also be supplied neoprene coated for improved oil resistance. These gloves can also be supplied with a roll for use with the ring system.

Sizes: 8, 9, 10 & 11

Part No. 3580

MANCHETTES

Heavy duty thick and thin section Manchettes long fit for diving suits both commercial and sport.

	Dia. 'A'	Dia.'B'	Dia.'C'	Part No.
Small	36	92	170	5004
Medium	42	92	170	4732
Large	45	92	210	4589

WAIST SEALS

Seals as used on two part dry suits. Nine- sizes available.

74cm Part No. 3931 78cm Part No. 3898 82cm Part No. 3899 86cm Part No. 3900 90cm Part No. 3932 94cm Part No. 3933 98cm Part No. 4403	102cm Part No. 4502 107cm Part No. 4469
All the above sizes are circumferences +/- 2cm.

CALF FITTING SOCK

CALF FITTING SOCKS

Designed for wearing with suits using Ankle Seals.

	'A'	'B'	'C'
XS	115	260	270
S.	115	280	270
M.	120	295	280
L.	125	310	290

Part No.
5792 X Sml.
3849 Sml.
3850 Med.
3851 Lge.

BALACLAVA HOOD

Standard flat section hood made for cost effectiveness, from flat formers but conforms readily to keep head dry, for extra comfort and warmth could be worn over Wet Suit Hood.

Part No. 3579

'C' TYPE HOOD

One size hood made on 3-dimensional former, for wearer comfort, comes complete with ear pads, exhaust valve at back of hood and with a grommet at the neck opening. For use in conjunction with Divers Neck Ring, supplied with inner neck seal if required.

Part No. 187

BICEP SEAL

For use with short arm tops.

	'A'	'B'	Part No.
Small	50	135	6197/S
Medium	57	125	6197/M
Large	64	115	6197/L

WRIST/CUFF SEAL

Standard design Seal in four sizes.

	Dia. 'A'	Dia. 'B'	Pt. no.
Extra Small	40	76	3550
Small	40	90	4114*
Medium	43	90	3599*
Large	46	90	3506*

'A' TYPE ANKLE SEAL

	Dia. 'A'	Pt. no.
Large	46	3809
Small	40	6255

Tapered ankle which can be cut for a larger fit.

NECK SEAL

The seal shown as used on rear entry dry suits. Extra length makes fitting easier. Part No. 1726

The same seal is used with a grommet insert for use with clamp ring. Length reduces to 263mm. Part No. 188

HEAVY DUTY WRIST SEALS

For use with heavy weight dive suits.
Can be trimmed for larger diameter opening at the wrist.

	Part No.	Dia. 'A'	Dia. 'B'
Extra Large	5749	50	105
Large	4832	46	98
Medium	4833	43	98
Small	4834	40	95

(Nominal thickness 1.14 - 1.27)

BEADED WRIST / CUFF SEAL

For use with wrist ring system.

	Dia 'A'.	Part No.
Small	40	4871
Medium	43	4870
Large	46	4869

FLAT SOCKS

Standard design.

	Part No.	Dimension 'A'
Extra Small	5791	260mm
Small	3578/1	275mm
Medium	3578/2	300mm
Large	3578/3	325mm

'3D' SOCKS

3 Dimensional Socks of ambidextrous design for fitting to dry suits with 200 or 180 width trouser opening.

	Dim. 'A'	Dim.'B'	Part No.
Small	230	295	4080
Medium	250	300	4081
Large	270	305	4082

Dimension 'B' less 60 on 180 width trouser opening.

'S' TYPE HOOD

One size hood made on 3-dimensional former for comfort, complete with foam ear pads. Used extensively on Submarine Escape Suits but could be ideal for windsurfing and sport diving.

Part No. 1610

FLANGED HOOD

Made in a flat form to provide a good fit on the head, but with a flange section so it can be stuck to the suit.

Part no. 5025

If you are interested in products which are not shown in the catalogue please contact us, as there are a number of non-standard items available upon customer request. We are also happy to develop exclusive designs to customer specifications.

Precision Dippings Marketing Ltd., Stover Trading Estate, Yate, Bristol, BS37 5PG, United Kingdom.
Telephone: +44 (0) 1454 318004. Fax: +44 (0) 1454 319961

Email:

Website: www.precisiondippings.co.uk